Filter
Top Products
12
SG17L7584 - Front - Primary Function Buttons
10. PIP POP BUTTON - Display a main camera image with secondary
camera sub-images:
• PIP (Picture In Picture) allows you to view three locations
simultaneously, one being the main channel, the others being viewed
as small images on the screen. To view detailed settings, see Main
Menu Controls on Page 25.
• POP (Picture on Picture) divides the screen into 4 screens, with the
main channel occupying two-thirds of the screen. Refer to the diagrams
adjacent that illustrates the difference between Dual PIP and POP.
Press the PIP/POP button to switch between the two functions. To
change these settings, See Main Menu Controls on Page 25.
11. AUDIO SEL BUTTON - In Quad Mode, the user can select the channel with audio. Pressing
this button automatically changes the audio from camera to camera. An icon indicates which
channel is currently receiving audio.
12. MUTE BUTTON - This button mutes audio. Press this button again to turn the audio feature
back ON.
13. TALK BUTTON - Press and hold this button to talk to a specific camera location. This button
must be pressed the entire time, while talking. To listen to the camera location, release the Talk
button.
NOTE: The supplied cameras DO NOT support this function. The supplied cameras support
LISTEN IN AUDIO only.
14. STANDBY BUTTON - This switch will turn the screen ON/OFF. A red LED indicator light is
ON when the monitor is in Standby mode. Press the button to turn the screen ON. Allow for 5-7
seconds for the picture to appear.
NOTE: To provide longer life to the CRT monitor, press the Standby switch when the system is
not in use (turns off the screen). The system will continue to record images to the DVR/VCR.
DUAL PIP
POP MODE
10 11 12 13 14