Filter
Top Products
26
Alarm Set
Alarm Set
1. ALARM - Configures the ALARM type for an alarm
event. Navigate by pressing the K and L buttons
to highlight, and press the OK button to switch
between DISPLAY modes:
• OFF - Alarm function is turned OFF
• OSD (On Screen Display) - When the alarm
occurs, the OSD displays [AL] in the
corresponding screen location.
• OSD + BUZZER - When an Alarm occurs, the
OSD [AL] appears on the corresponding
screen location, and a Buzzer will sound for the
set alarm period.
2. CH1 - CH8 - Set the alarm mode for cameras 1
through 8.
• Change the Alarm Interval - Navigate by
pressing the
K and L buttons to highlight the
number of seconds, and press the OK button
to select. Use the K and L buttons to change
the number of seconds for alarm display, and
press the OK button to accept the change.
• Press the
I and J buttons to highlight the alarm
type OK button to change between alarm
modes. Alarm Modes include OFF (no alarm),
N/O (Normally Open) and N/C (Normally
Closed). Press OK to accept the change.
NOTE: This N/O N/C Setting is for the external
alarm input terminal ONLY, and will not affect the
PIR cameras offered by Lorex.
3. RETURN - Return to the MAIN MENU. Navigate
by pressing the
K and L buttons to highlight, and
press the OK button to select
4. EXIT - Return to the camera view. Navigate by
pressing the
K and L buttons to highlight, and
press the OK button to select
[ALARM SET]
ALARM
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
RETURN
EXIT
:
:
:
:
:
:
:
:
:
:
:
[OFF]
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
[
]
[
]
This submenu allows you to configure the ALARM alert type and duration.This alarm type is used
in conjunction with external alarm input terminals. PIR cameras are offered by LOREX, but are not
included with this system.
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]