Magnavox CCZ196AT TV VCR Combo User Manual


 
Setting Up the VCR Plus+ Programming System 39
1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program the TV/VCR with your local channel
information. To fill in the boxes, you will need 1) a cable channel line-up list, if applicable (you can request
one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in
your TV guide or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable
Box/DBS output channel) for every VCR Plus+ channel.
TV Channels
Station
Call Letters
VCR PLUS+ CH.
CABLE/TV CH.
TV Channels
Station
Call Letters
V
CR PLUS+ CH.
CABLE/TV CH.
CCZ196comb.QX33 4/6/99 7:05 PM Page 39