Filter
Top Products
29
Recording Playing discs EditingBefore you start
Connections
Getting started
Changing the
Setup menu VCR functions Others
EN
STANDBY-ON
OPEN/CLOSEVIDEO/TV VCR
.@/:
GHI
PQRS TUV WXYZ
JKL MNO
ABC DEF
DVD
DISPLAY
SETUP
OK
0
21
4
65
3
9
7
8
CHANNEL
TIMER
TIMER SET
SEARCH AUDIO DUBBING
SLOW
CM SKIP
RAPID PLAY
VCR REC DVD REC REC MODE
DISC MENU
RETURN
CLEAR/C-RESET TITLESPACE
Recording
Note
• The remaining recording time will appear on the display panel during a One-touch Timer Recording,
press [DISPLAY] to see the remaining recording time on the TV screen.
• You cannot pause a One-touch Timer Recording.
• Unlike a Timer Recording, you can perform the following operations during a One-touch Timer Recording.
-Turning the power off.
-Using
[DVD REC I] and [STOP C].
• The unit will be turned off automatically under the following conditions.
1) No space remained on the disc.
2) When a power failure occurs.
• If OTR is finished in DVD during playback or REC mode in VCR, the DVD will be in STOP mode and the
VCR keeps the current mode.
• When OTR is finished and the power is turned off, the unit will switch to the standby mode automatically if a
Timer Recording has been programmed. Press [TIMER SET] to cancel the standby mode for using the unit
continuously.
DVD+
RW
DVD+
RW
DVD+RDVD+R
DVD-RW
DVD-RW
+VR
DVD-R
DVD-R
+VR
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby mode.
First:
DVD
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Using [REC MODE], select a
recording mode.
Refer to “Recording mode” on
page 25.
3
Using [CHANNEL
-
/ +] or
the Number buttons, select a
desired channel to record.
4
Press [DVD REC I] repeatedly
to select desired recording time.
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
When the unit reaches the
specified time, it will be turned off
automatically.
To change the recording length
during the One-touch Timer
Recording, press [DVD REC I]
repeatedly until the desired length
appear.
To cancel the One-touch Timer
Recording within the specified
time, press [STOP C] .
3
This operation may take a
while to be recognized.
I
0:30
This operation may take a
while to be completed.
0:30
(Normal Recording)
8:00 7:30
1:00
One-touch Timer Recording (OTR)
4
3
2
1