Magnavox ZC352MW8 DVR User Manual


 
77EN 77EN
Editing
Function Setup
PlaybackRecording
Basic Setup
ConnectionsIntroduction Others Español
Press [STOP C] if you are playing back a disc.
1
Press [SETUP].
2
Use [K / L] to select “Required
Settings”, then press [OK].
3
Use [K / L] to select a desired item,
then press [OK].
Video Input
TV Aspect
Required Settings
TV Audio Select
Stereo
4:3 Letter Box
CC Style
V-Chip
3
1
4
5
2
Submenu will appear.
4
Refer to
1
to
2
on this page and set
the selected item.
• For
3
refer to page 41.
• For
4
refer to page 27.
• For
5
refer to pages 28-30.
5
When you finish with setting, press
[SETUP] to exit.
1
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired option, then press [OK].
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
TV Aspect
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
SETUPS
Required Setting
2
V-Chip
You can set the viewing limitation for the digital TV
programs to prevent your children from watching
inappropriate programs.
This feature is available only after the digital TV
ratings have been downloaded.
The ratings can be downloaded by the unit
automatically if it is available in your area.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the Number
buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
password.
Password Input
2) Use [K / L] to select a desired item, then press [OK].
V-Chip
Downloadable Rating
Change Password
Downloadable Rating
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
Downloadable Rating is currently not available.
This message will also appear when you try to access
“DOWNLOADABLE RATING” after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
To set the rating:
Use [K / L] to select “BLOCK SETTING” then press [OK]
to show the various types of ratings. Use [K / L] to
select a desired rating to set, then press [OK] to show
the levels for the rating. Use [K / L] to select a level,
then press [OK] to switch “VIEW” or “BLOCK”. If you set
one level to “BLOCK”, all the higher levels will be turned
to “BLOCK” automatically.
To clear the downloadable rating information and its
setting:
Use [K / L] to select “CLEAR DOWNLOADABLE
RATING”, then press [OK].
Change Password
Change the current password.
Use [the Number Buttons] to enter new access
password.
Note
• When you forget the access password at step 1),
enter 4,7,3,7 using [the Number buttons] in the
password input window. Password will be cleared.
• Depending on the type of rating system, you may set
the levels individually.