Magnavox MBP5210 Blu-ray Player User Manual


 
EN-44
D Note for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”
The range of input numbers is between 0 and 255.
If you enter a number larger than 255, the number will automatically be 255.
When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)
If you want to enter a 1 or 2-digit number in one cell, press [Æ] to move on to the next digit’s in the cell.
D Note for “Proxy Address” and “Proxy Port”
The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than
65535, it will be regarded as 65535.)
For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
Choose a connection speed in accordance with your network environment.
When the settings are changed, the network connection may be disabled depending on the device.
Wireless
If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.
Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.
Auto Scan (Wireless)
1. Use [Î / ï / Í / Æ] to select “Network Setup” in the home menu, then press [OK].
2. Use [Î / ï] to select “Wireless”, then press [OK].
3. Use
[Î / ï]
to select “Auto Scan”, then press
[OK]
.
• This unit will start searching for wireless networks automatically.
4. The result of wireless network searching will be displayed. Use [Î / ï] to select the appropriate wireless network
name (SSID), then press [OK].
• If you select an SSID with “
”, please go to step 6.
Access Point Setting (Auto Scan)
Please select the access point.
3/7
Cancel
Retry
Access 1
Access 2
Access 3
5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA password of the selected wireless network
using cursor buttons, number buttons and color keys, then press [RED] to confirm the password.
• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the
router.
1234567890
SP
a/A/@
CLR
Done
abcdefghij
hlmnopqrst
uvwxyz.-
Done Cancel Clear a/A/@
3/7
Access Point Setting(Auto Scan)
Please input the WEP/WPA Key with software keyboard.
XXXXXXX
Continued on next page.