Filter
Top Products
EN - 10
4. CONNECTIONS
4.1. Connection to a TV
HDMI Connection (Supports up to 1080i
(*1)
, 1080p
(*2)
, 1080p/24
(*3)
resolution.)
No analog audio connection required.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector
are matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also
known as HDMI category 2 cable) is recommended for better compatibility.
D Note
• If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it may be
the TV. Please refer to the TV’s user’s manual.
• If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV
input is not an HDMI-DVI Input terminal.
Standard Composite Video + Standard Audio Connection (Supports only 480i resolution.)
• Connect this unit directly to the TV. If the audio / video cables are connected to a VCR then the pictures may be
distorted due to the copyright protection system.
(*1)
1080i:
Outputs video data with a frame rate of 30 frames per second.
(*2)
1080p:
Outputs video data with a frame rate of 60 frames per second.
(*3)
1080p/24:
Outputs video data with a frame rate of 24 frames per second.
HDMI IN
VIDEO OUT AUDIO OUT
L
R
LAN
HDMI OUT
HDMI OUT
HDMI cable
(not supplied)
Your TV
VIDEO OUT AUDIO OUT
L
R
VIDEO OUT AUDIO OUT
L
R
HDMI OUT
LAN
AUDIO IN
R
L
VIDEO IN
Your TV
Video cable (not supplied)
Audio cable
(not supplied)