Filter
Top Products
EN - 47
EN
C Caution
• Please do not unplug the AC power cord, LAN cable, wireless modem / router or press
[(POWER-ON)]
to turn
the unit to Standby mode while using “Network Update”.
D Note
• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary settings.
• For the network connection, refer to “Connection to the Network” on page 13.
• For the network setup, refer to “Network Connection” on page 38.
• Software update will not change any of the current settings.
11.6. Restore Default Settings
Menus to reset player settings, format a USB Memory Stick and clear network settings.
1. Use [] to select “Settings” in the Home Menu, then press [OK].
2. Use [] to select “Others”, then press [OK].
3. Use [] to select “Initialize”, then press [OK].
4. Use [] to select the desired setting, then press [OK].
5. Use [] to select “Yes”, then press [OK].
6. Confirmation message will appear. Press [OK] to complete the setting.
7. Press [HOME] to Exit.
C Caution
• Do not remove the USB Memory Stick while executing “Format USB Memory Stick” or “(USB Memory Stick) Erase
Saved BD-ROM Data”. It will damage the USB Memory Stick.
D Note
• “Format USB Memory Stick” and “(USB Memory Stick) Erase Saved BD-ROM Data” are not available when a Blu-ray
Disc™ is in the unit.
HOME A “Settings” A “Others” A “Initialize”
“Reset Settings”:
All the settings except for the “Parental” and “Network Connection” settings will be reset to default.
“Format USB Memory Stick” (Only available when a USB Memory Stick is connected):
Initialize the USB Memory Stick.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, on this player.
“(USB Memory Stick) Erase Saved BD-ROM Data”
(Only available when a USB Memory Stick is connected):
Clears the supplemental data for the BD-ROM playback, such as Subtitle data, from the USB Memory Stick.
“Reset Network Settings”:
Reset the network setting to the default.