Filter
Top Products
30 Rerecording (Tape Duplication)
AUDIO and VIDEO OUT Jacks on source unit
V,DEOOUttoV,OEO,n ye,,ow/
1
Audio Cable from
AUDIO OUT to AUDIO In (white)
J
AUDIO andVIDEO In Jacks
on the front of the TV/VCR
Make the connections shown above, using audio
and video cables (not supplied). Connect the
source unit (VCR or camcorder) to a power
source after connections are made.
The VCR or camcorder will play your tape. Insert a
prerecorded tape in the source unit. If playback
begins, press STOPon the unit.
The TV/VCR will record your tape. Insert a blank
tape in the TVNCR. Make sure the tape's record
tab is intact and the TV/VCR is on.
Point the TVNCR remote control at the
TVNCR. Press Number buttons O, 0 so AUX
appears on the screen.
The TV/VCR is now in Line Input or Auxiliary mode.
If you only want to watch material playing on the other
VCR or camcorder, press PLAY on the source unit
(VCR, etc.) now to start playback. The material will be
shown on the TV/VCR'sAUX channel. To dub the
material, continue with steps 5-7.
Point the TVNCR remote control at the
TVNCR. Press SPEED until the desired tape
speed (SP or SLP) appears on the screen.
Press PLAY on the source unit and
REC(ord)/OTR on your TVNCR at the same
time. Copying will begin.
To stop copying, press STOP/EJECT on the
TVNCR, then stop the tape on the VCR or
camcorder.
Helpful Hints
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment
may operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Programs that are copyright
protected may not record clearly.
• Tape speed details are on page
24.