Filter
Top Products
One-Touch Recording 25
One-Touch Recording lets you program an immediate timed
recording 30 minutes to eight hours long. Make sure:
● Channels are set.
● The desired recording speed (SP,SLP) has been selected with
SPEED.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR is in VCR position. (The VCR/TV light will appear. If it
does not, press VCR/TV once.)
1
Use CH or the Number buttons to select the
channel you want to record.
2
Press REC (or RECORD on the VCR) repeatedly until
the desired recording length (30 minutes to eight
hours) appears in the upper left corner of the screen.
Recording will begin immediately.The TIMER and REC(ord)
lights will appear on front of the VCR.
3
To stop an OTR before recording is finished, press
STOP on the remote or STOP/EJECT on the VCR.
To cancel the OTR but continue recording, press REC or
RECORD repeatedly until REC appears in the upper left cor-
ner of the screen.
When the OTR is finished, the VCR will eject the tape and
turn itself off.
OTR (0:30)
SP
• To change the recording length
while an OTR is in progress, press
REC or RECORD repeatedly until
the desired length appears on the
screen.
• You cannot pause OTR recording.
• If the preset time for a timer
recording comes up during an
OTR,the OTR has priority.The
timer recording will not occur.
• To show the time remaining for an
OTR,press STATUS repeatedly
until OTR and the time remaining
appear on the screen.
• If the end of the tape is reached
during an OTR, the VCR will stop
recording, eject the tape, and turn
itself off.
Helpful Hints
2
3
CH
321
654
987
0
POWER
STATUS
SLOWREC MEMORY
SPEED
SEARCH MODE STILL/PAUSE
VCR/TV EJECT
M
EN
U
CLEAR
REW
PLAY
STOP
F.FWD
1