Filter
Top Products
Automatic Playback
When you put a tape in the VCR, the power will come on automati-
cally. If the tape’s record tab is missing, play will begin. (If a timer
recording is set, you may have to press POWER to turn on the
VCR. Turn off the VCR for the timer recording later. If you insert a
tape without a record tab when a timer recording is set, the VCR
will eject the tape.)
Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the
VCR will rewind the tape to the beginning, eject the tape, and turn
itself off.
If the real-time counter memory is set, the VCR will only rewind the
tape to the point at which the counter is set to zero, then stop.The
VCR will not eject the tape or shut itself off.
Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR
must be plugged in). If a Timer Recording is programmed, a tape
can only be ejected with the power on. Be sure to insert a tape for
the Timer Recording, then turn off the VCR power.
Tracking
The VCR automatically adjusts tracking to give you the best possible
picture quality during normal play. With some recordings, you may
get a better picture using manual tracking.
To adjust the tracking manually, press CH on the remote or
CHANNEL
o/p
on the VCR during normal or slow motion play.
NOTES:
• Tracking returns to automatic tracking adjustment when you insert a
tape or stop play.
• Use CHANNEL
o/p
on the VCR or CH on the remote to
remove vertical jitter in a Still picture.
38 Automatic Playback Features
Before
Tracking
Adjustment
After
Tracking
Adjustment