Filter
Top Products
AMP Gain
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the “Low” side if the headphones have low impedance and on the
“High” side if they have high impedance.
Low
(Default):
Set the gain of the headphone amplifier to
“Low”.
Mid:
Set the gain of the headphone amplifier to
“Mid”.
High:
Set the gain of the headphone amplifier to
“High”.
NOTE
The headphone volume varies depending on the “AMP Gain” setting. Decrease the
volume or mute the audio first if changing this setting while listening to audio.
Dimmer
This switches the brightness of the display.
Off: Turns the display off.
Dark: Very low display brightness.
Dim: Reduced display brightness.
Bright
(Default):
Normal display brightness.
You can also adjust the display by pressing DIMMER on the remote control unit.
iPodMode
Set whether to operate the iPod from this unit or on the iPod.
Direct
(Default):
Operate the iPod on the iPod itself.
Remote:
Operate the iPod from this unit and the remote
control unit.
Operation mode can also be switched by pressing MODE on the remote control unit.
Contents Connections Playback Settings Tips Appendix
49
Front panel Display Rear panel Remote Index