Filter
Top Products
Timer Recording with the VCR Plus+ Programming System (cont’d) 39
Turn off the VCR for a timer recording! Put a tape
in the VCR. Leave the Cable Box/DBS on.
9
Press the POWER button to turn off the VCR.The VCR
must be turned off for a timer recording to take place. The
r
light will appear on the display panel.The
r
light and the
Cassette-Inside light will flash when you turn off the VCR if there is
not a tape in the VCR.
7
Press the ALT/SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the OK/STATUS or TIMER button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-screen
display will disappear.
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday.The recording
will not occur, even though the VCR
may accept the way you programmed
the recording.
• To exit the VCR Plus+ programming
system at any step, press the TIMER
button.
• If the timer recording you just pro-
grammed overlaps another timer
recording, PROGRAM NOT COM-
PLETED/PROGRAM OVERLAP will
appear. Details are on page 46.
• If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording is set to begin.To remove
the message, press the CLEAR button.
• To check your timer recordings, see
page 45.
Helpful Hints
6
• If you want to record the program one time only, go to
step 7. You also may press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen.The VCR will record a pro-
gram every day from Monday through Friday, starting at the same
time and recording for the same length of time.
• If you want to record the program every week, press the
Number 9/WEEKLY button so that WEEKLY PROGRAM
appears at the top of the screen.The VCR will record a pro-
gram on the same day, at the same time, for the same length of
time every week.
5
Press the OK/STATUS button. If the VCR PLUS+ and CABLE/TV
channel lists appear on the screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set in
step 4. Press the Number buttons to enter the CABLE/TV channel
number from your list on page 36, then press the OK/STATUS but-
ton.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12 CABLE/TV
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 06/21/00
WEDNESDAY
DAILY: 8 WEEKLY: 9
CONFIRM: OK END: TIMER
5
7
6
8
9
VCRTV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
SMARTPICTURE
CHVOL
MENU
TIMER
JOG/SHTL
TURBO
TIMER
AUDIO/
MUTE
SKIP
SEARCH
TAPE
MANAGER
OK/STATUS
-
.......... ..........
+
CBL/DBS
1
–+
*
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
START STOP DATE
VPS/PDC DAILY
SPEED DBS/SAT
PLAY
REW FF
STOP
WEEKLY
/OTR
REC
-
+
-
+
ALT
0
CLEAR
SAT/
REV
FWD
MV5100 27-84 7/21/00 10:59 AM Page 39