Filter
Top Products
15
ENGLISH
PRESET Mode
(When operating non-Marantz AV
equipment products)
This remote control is preset with remote
control codes from AV equipment by other
manufacturers. The preset codes are TV,
VCR, LD, CABLE, DSS, DVD, TAPE, TUNER,
CD, CD-R, MD and AMP. Settings can be
made in one of two ways.
When the preset codes are set, the following
codes are contained in the source button of the
remote control.
See the attached manufacturer number list for
the preset manufacturers, devices, preset
numbers, and other settings.
Remote control Corresponding Device name
source name preset code
TV TV Television
DVD DVD DVD player
VCR VCR Video deck
DSS SATELLITE Satellite broadcasting
tuner equipment
TUNER
RECEIVER/TUNER
AM FM TUNER
CD CD/CD-R PLAYER CD player
CD-R CD/CD-R PLAYER CD recorder
MD CD/CD-R PLAYER MD deck
TAPE TAPE Cassette deck
AUX1 CABLE Cable television
AUX2 LASER DISC Laser disc player
AMP AMPLIFIER Amplifier or receiver
RECEIVER/TUNER
• When using Marantz products, TV and DVD
can be set to TV1 (TV/VDP: Projector) and
TV2 (PDP: Plasma display), and DVD1 (first
DVD player) and DVD2 (second DVD
player), respectively, to match the
customer’s operating environment. These
settings are made in PRESET mode.
In the factory default state, the remote
control is set to TV1 and DVD1. To make the
presets, enter the numbers below while
referring to the section “Entering and Setting
the Manufacturer Number Directly”.
TV1: 0001, TV2: 0002
DVD1: 0001, DVD2: 0002
03.10.6, 4:17 PMPage 15