Filter
Top Products
30
ENGLISH
• Use the cursor button to increase the time and
the
button to decrease the time. The interval
time can be set from 0.5 seconds to 5 seconds.
• To stop the time adjustment, press the D5
(CANCEL) direct button.
4-5 Press the OK cursor button @0.
4-6 Press the TV source button !4.
4-7 Press the > button y to display the first
page.
4-8 Press the D1 (INPUT) direct button t.
4-9 Press the AMP source button !4.
4-10 Press the > button y to display the first page.
4-11 Press the D1 (AUTO) direct button t.
4-12 Press the OK cursor button @0.
The LCD displays END to indicate that
programming is completed.
5 To program another macro, repeat the
procedure in steps 3 to 4-12.
6 To exit macro programming, press the M
button r.
The
USE
indicator displays to indicate that the
remote control can now be operated.
When the macro are programmed 20 operations or
more, the display returns macro menu.
Edit the macro so that it has 20 operations or less.
Executing Macro Programs
1 Press the M button r shortly.
The macro menu is displayed.
2 Press the D1 (M-01) direct button t.
3 Check that the operations of the program
are executed step by step.
The name of the operation button is displayed on the
LCD.
• The programmed section is indicated by &. The
bar indicator moves to indicate the progress of
the program.
Select DVD source → PLAY transmit → Interval
time: 2 seconds → Select TV → TV INPUT
transmit → Select AMP → AUTO transmit → End
• To cancel transmission of the program while it is
in progress, press any button.
12 3
MACRO
PAG E
12
MACRO
PAG E
12
MACRO
PAG E
12
03.10.6, 4:18 PMPage 30