29
ENGLISH
Programming Macros
This example shows how to program a macro
to the M-01 button.
(The screens shown in the example are the
default factory states. If the names of direct
buttons were rewritten, these modified names
would be displayed.)
Switch amplifier to DVD source → Play DVD
player Æ Set the interval to 2 seconds until the
next signal is sent → Switch TV to video input
→ Set the amplifier mode to AUTO
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the D4 (MACRO) direct button t.
The macro menu is displayed.
The
indicator displays and
blinks.
3 Press the D1 (M-01) direct button t.
The menu has four pages, and so use the > button to
select the page when programming other buttons.
4 Press the buttons in the sequence that
you want the operations performed.
The actual program starts here.
Each time a button is pressed, the name of the button
is displayed on the LCD.
4-1 Press the DVD source button !4.
4-2 Press the (PLAY) button !3.
4-3 Press the
or cursor buttons @0.
The interval time is displayed on the LCD.
4-4 Press the or cursor buttons @0 and
set to 2.0 (seconds).
12 3
4-1 4-2 4-3
03.10.6, 4:18 PMPage 29
