Filter
Top Products
32
ENGLISH
Erasing Steps of Macro Programs
This example shows how to delete the TV and
INPUT steps from the following macro
programmed to M-01.
The program is changed from
DVD → PLAY → TIME → TV → INPUT → AMP
→ AUTO
to
DVD → PLAY → TIME → AMP → AUTO.
1 Hold down the M button r for three
seconds or more.
The menu is displayed.
2 Press the D4 (MACRO) direct button t.
The macro menu is displayed.
The
MACRO
indicator displays and
LEARN
blinks.
3 Press the D1 (M-01) direct button t.
4 Press the D5 (EDIT) direct button t.
The LCD displays DVD, and the step position is
indicated by 7.
The programmed section is indicated by &.
5 Press the cursor button @0 to display TV.
6 Press the CLEAR button !6.
The LCD displays CLEAR, and TV and INPUT are
deleted.
When deleting steps from a macro program, the
operations performed for a source after switching to
the source are also deleted.
If the CLEAR button is pressed at the INPUT
position, only the INPUT step is deleted.
The & indicator for the step is also changed.
• To check the modified steps, press the
or
cursor button.
7 To exit, press the M button r.
When finished, to change another macro program,
press the OK cursor button to return to the menu, and
then repeat the procedure for steps 3 to 6.
12 3
USE
PAG E
1
LEARN
MACRO
PAG E
12
LEARN
MACRO
PAG E
12
45 6
NAME
MACRO
PAG E
12
NAME
MACRO
PAG E
12
NAME
MACRO
PAG E
12
03.10.6, 4:19 PMPage 32