Filter
Top Products
23
ENGLISH
134
USE
PAG E
1
LEARN
USE
PAG E
12
LEARN
USE
PAG E
12
6 Press the or cursor button @0.
The letter is changed to “A”.
• The
and cursor buttons can be used to move
the blinking indicator of the section to be
rewritten.
7 Press the or cursor buttons @0 to
select AUDIO on the direct button
indicator. The A flashes to indicate that the
name can be changed.
8 Press the 7 numeric button !1 to select S.
Each time the button is pressed, the button cycles
through S → T → U → 7 → S.
9 Press the cursor button @0 to move the
flashing section.
10 Press the 5 numeric button !1 to select O.
11 Follow the same procedure to enter U, N,
and D.
12 When finished entering the text, press the
OK cursor button @0.
13 Press the M button r.
The
USE
indicator displays on the LCD, and the
newly stored codes can be used.
The input is overwritten, and so the currently
displayed text is erased.
Up to six characters can be entered for the direct
button indicator.
Erasing Programmed Codes
(Returning to Initial Settings)
Codes can be erased in five ways: by buttons,
direct buttons, direct button pages, sources,
and by all memory contents.
Erasing Buttons and Erasing Direct
Buttons
This example shows how to erase the code
learned from the PLAY button of the DVD
player and the AUTO code of the AMP direct
button.
Erasing buttons
03.10.6, 4:18 PMPage 23