Marantz UD7006 Blu-ray Player User Manual


 
30
ENGLISH
R
L
R
L
Internet
To WAN side
Modem
To LAN port
To LAN port
LAN port/
Ethernet
connector
Computer
TV
Router
n System requirements
Internet connection via broadband.
Modem
A device that connects to the broadband and conducts communications on the Internet.
Some modems also incorporate a router.
Router
When using the unit, we recommend a router with the following features.
• Built-in DHCP (Dynamic Host Configuration Protocol) server.
This function automatically assigns an IP address on the LAN.
• Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)
Computer (recommended system)
• OS
Windows
®
XP Service Pack2 or more or Windows Vista
• Software
Server software supporting Windows Media Player ver.11 or DLNA.
Ethernet cable (CAT-5 or greater recommended)
• An ethernet cable is not included with the unit.
• Use only shielded STP or ScTP LAN cable which is available at retailer.
• We recommend a shielded straight cable (normal type) for Ethernet connections.
If you use the flat type or a non-shielded cable, the noise may adversely affect other devices.
n Checking the network connection
After connection, test the Internet connection with “Connection Test” in “Network” on the GUI menu
(vpage38).
• If “Network is FAILED.” is displayed in the test, check the IP address with “Network” in “Information”
on the GUI menu, then set “DHCP” to “Manual” (vpage38).
• The unit can use the DHCP function to automatically set up the network.
• When setting up your network manually, after subscribing to an ISP, make the settings according to
directions in “Network” on the GUI menu (vpage38).
• If you connect the unit to a network without a DHCP function, conduct IP address and other settings
according to “Network” on the GUI menu (vpage38).
• The unit does not support PPPoE. If you subscribe to a service that is set with PPPoE, a PPPoE
compatible router is required.
• When setting up the network manually, consult with your network administrator for the settings to
make.
n Registering the connected device for the network
For playing files stored on a device connected via a network, the device must have the unit registered
in advance.
• For registering, refer to the operation manual supplied with the server.
For Internet connections, use an ISP (Internet Service Provider). Ask your local dealer for details.
NOTE
• Do not connect an NETWORK connector directly to the LAN port/Ethernet connector on your
computer.
• It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a
broadband connection, there is no need to subscribe anew.
• The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.
• Marantz assumes no responsibility whatsoever for any communication errors or problems resulting
from customer's network environment or connected devices.
Connecting to a network