Filter
Top Products
31
Basic versionSimple version Information
ENGLISH
Advanced version
Playback (Advanced operation)
This section describes the playback of files stored in the DVD, CD
or USB memory device and the operation of Home menu.
n Opening the Home menu screen (vpage31)
n Playing files (MEDIA PLAYER) (vpage32)
n Playing YouTube video (vpage34)
n Playing Netflix video picture (vpage34)
How to make detailed settings (vpage35)
Home menu screen
The unit can play music, photos, video files stored in the USB memory
device connected to the front panel of the unit or on the sever
connected via the network. For playback operation, use the Home
menu screen.
Opening the Home menu
screen
1
Press HOME.
The Home menu is displayed on the
television screen.
2
Press uio p to move the cursor
to the menu item to be used.
3
Press ENTER.
The icons show the category of
content applicable to each operation.
Video Audio Photo
For details of the media corresponding to each icon, see “Playable media”
(vpage48).
n Home menu screen
Home Menu
MEDIA PLAYER
SETUP
Select
QUIT
VIDEOS
Confirm
ENTER
YouTube
NETFLIX
q e
t r
w
q MEDIA PLAYER (vpage32)
The unit can play music, photos, video files stored on the device
connected via the network or in the USB memory device connected
to the front panel of the unit.
w NETFLIX (vpage34)
The Netflix contents are played.
e YouTube (vpage34)
The YouTube contents are played.
r QUIT
The Home menu is closed.
t SETUP (vpage35)
The GUI menu setup screen is displayed for setting the unit.
Remote control connection
When you use this unit connected to a Marantz amplifier, this unit
receives operation signals sent from the amplifier and operates
accordingly.
n Connection
Use the supplied remote connection cable to connect the REMOTE
CONTROL IN terminal of this unit to REMOTE CONTROL OUT
terminal of the amplifier.
n Setting
Set the remote control switch on the rear panel of this unit to“EXT.
(EXTERNAL)”to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the remote
control switch to “INT. (INTERNAL)”.
Signal flow
Amplifier
Remote control cable(supplied)
Set to “EXT. (EXTERNAL)”This unit
n Flasher Input
This is used when controlling components from different rooms
with a keypad or other input device.
Set the remote switch to “INT. (INTERNAL)” when using a flasher
input.
Home menu screen