Filter
Top Products
16 MatrixPRO 12x - 12 Input Matrix Switcher Manual # 26-0301000-00 / Revision C
GUI Operation
The following section describes the operation of the GUI.
A/V Routing Tab
This page is used for routing of the Video and Audio (if applicable).
Select the A/V mode first. Either select Video only, Audio only or Audio follow Video. Press the Input button of the
desire input to be routed to the Output or Outputs. Select all Outputs to receive the selected Input. Pending routes
are shown in red. Select a new Input and click on Outputs to receive the selected Input. Continue selecting Input
and Output routings until the Look is setup then press Take to initiate routing. Press Cancel to clear all pending
routes.
To save a Preset, press Save then select one of the 16 memory buttons. To Recall a Preset, press recall then one of
the 16 memory buttons.
If the MatrixPRO is operated for the front panel or serially, the configuration of the MatrixPRO can be checked by
pressing the Read from MatrixPRO button. To unroute all, press the Clear All Routing button.