Filter
Top Products
ELX16-240 INSTALLATION AND CONNECTION
14
Error!
Unknown document property name.
(v 1.0)
Rugged CCTV
5. Running OSD menu
5.1. Using menu
Press the [MENU] button to open the OSD Configuration Menu.
(1) Main Menu Tabs: The select ed tab is shown in blue and the related sub-menus will be shown below
the tab. To move to the previous/next Main Menu Tab, use the [ / ] arrow buttons. To move to a
sub-menu, press the [ENTER] or [] buttons.
(2) Sub-menu: The select ed sub -menu is shown in blue and the related setting page will be shown to the
right of the sub-menu. Use the [/] arrow button s to move within the sub-menu list. To move to the
setting page press the [ENTER] button. To exit the setting page, press the [EXIT] button.
(3) Setting Page : The select ed item is shown in gray. To move within each page, use the [ / ] or
[/] arrow buttons. Press the [ENTER] button to change the value of a setting. When the setting value is
a word, a dialogue box to edit the word will open. When setting value is a number, it should be set with
using the [ / ] or [/] arrow buttons. After the value is set, press the [EXIT] button. To exit the
Setting Page, press the [EXIT] button.
(4) Help message : Related information for each menu/setting will be displayed here.
(1) Main Menu
(2) Sub-menu
(3) Setting Page