Filter
Top Products
ELX16-240 INSTALLATION AND CONNECTION
16
Error!
Unknown document property name.
(v 1.0)
Rugged CCTV
6. Setting remote controller
6.1. Setting ID of ELX16-240
When controlling several DVRs with one remote controller, set Remote Control ID as follows.
(1) Press the [MENU] button.
(2) Select “System” with using [] button and press the [ENETR] or [] button.
(3) Select “Miscellaneous” from the sub-menu list using the [
] button and press the [ENETR] button.
(4) Select “Remote Control ID,” and press the [ENETR] button.
(5) Select a value using the [ / ] buttons and press the [EXIT] button.
(6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode.
Up to 16 DVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”.