Filter
Top Products
INSTALLATION AND CONNECTION ELX16-240
Rugged CCTV
Error! Unknown document property name.
(v 1.0)
27
9.1.3. Configuring Sensor at OSD menu
(1) Press the [Menu] button, and select the “Alarm Source ” among OSD menus.
(2) Select “Sensor” menu and press the [Enter] button for moving to the sub-menu.
9.1.3.1. Global
It is for setting 16 sensors simultaneously. It has three types; Off / Normal Open (N.O.) / Normal Close
(N.C.)
(1) Select “Global” and set a type.
(2) Press the “Apply ” button in order to confirm the setting value.
9.1.3.2. Configuration
It is for setting 16 sensors separately. Select and set each sensor.
(1) Select “Configuration” and press the [Enter] button.
(2) Select a sensor (S1 ~ S16) and set its type.
(3) Press the [Exit] button after setting.