Filter
Top Products
INSTALLATION AND CONNECTION ELX16-240
Rugged CCTV
Error! Unknown document property name.
(v 1.0)
43
11.2. Configuring ELX16-240’s Network Information
The following description is on based on Ethernet connection. For more detailed information on the
Network Settings Page, please refer to “ ELX16-240 OSD User’s Guide”.
(1) Press [MENU] button.
(2) Select “System” using the [ / ] buttons and press [ENTER].
(3) Select “Network” using the [
/
] buttons and press [ENTER].
(4) Select “IP Addr” using the [/] buttons and press [ENTER].
(5) Press [EXIT] button after entering IP address in the dialogue box.
(6) Select “Net Mask” using the [/] buttons and press [ENTER].
(7) Press [EXIT] button after entering Net Mask in the dialogue box.
(8) Select “Gateway ” using the [/] buttons and press [ENTER].
(9) Press [EXIT] button after entering Gateway in the dialogue box.
(10) Select “DNS” using the [/] buttons and press [ENTER].
(11) Press [EXIT] button after entering DNS in the dialogue box.
(12) Press [EXIT] button to exit the page.