Filter
Top Products
INSTALLATION AND CONNECTION ELX16-240
Rugged CCTV
Error! Unknown document property name.
(v 1.0)
25
9. Connecting and Configuring DIO Ports
Trimming Wire
When connect ing a wire to a terminal block, follow the instructions below. Note the different types of
wire that can be used.
Stranded Wire: Peel off the wiring cover
8~10mm and solder it. Wire gage should be
AWG 22 ~ 26.
Solid Wire: Peel off the wiring cover 8~10mm
and solder it. Wire gage should be AWG 20 ~
26.
Inserting & removing wire
To insert the wire, use a screwdriver as
shown in the diagram to the right.