Filter
Top Products
16 MD 80137 Digital DVD Recorder
and Player User’s Manual
AV Amplifier/Receiver Connection
The following connections are shown as an example only. Please choose the correct
connections for your equipment. For example, you should use either an analog or a
digital audio connection – not both. If you are using a digital connection, you should
use either optical or coaxial – not both.
Digital Audio
For an optical connection, connect an optical cable (also referred to as Toslink)
to OPTICAL DIGITAL OUT on the DVD recorder and OPTICAL DIGITAL IN on the AV
Amplifier or TV.
For a coaxial connection, connect a coaxial digital audio cable to COAXIAL
DIGITAL OUT on the DVD recorder and COAXIAL DIGITAL IN on the AV Amplifier or TV.
Optical and coaxial
digital audio cables
sold separately.
1b
1a
panels and connections
You must use
the correct audio
settings to avoid loud
noise from your
speakers. Please refer
to Audio Setup on
page 34.