1
2
After loading, the menu screen of the DVD should appear.
Use the Navigation (√,®,π,†) buttons 1 to select the
desired option and the ENTER/Play/Pause (®p) button 2
to select it.
3
43
DVD OPERATION
Press the Power button 1 to turn on the unit; the
STANDBY indicator will go out. Press the DISC button 2 to
select the DVD mode.
2
1
1
Press the OPEN/CLOSE button to open the compartment.
Insert a disc with the label side facing up into the disc tray.
Press the OPEN/CLOSE button to close the compartment.
To stop playback, press the Stop (X) button 1; “PRE-
STOP” will appear on the TV screen. Because the unit will
remember where you stopped, simply press the
ENTER/Play/Pause (®p) button 2 to resume playback
where you left off (resuming playback).
If the Stop (X) button 1 is pressed twice, the unit will stop
completely.
2
1
4
NOTES:
• If a MENU appears on the TV screen, press the Navigation (√,®,π,†) buttons to select the desired option/item, then
press the ENTER/Play/Pause (®p) button. Please make sure to refer to the disc’s jacket or case for additional
information.
• Resuming playback may not work on all discs.
• Press the CLOCK button to show the time in the display and press again to show the Title/Chapter playback time.
PLAYBACK OF A DVD
I
MPORTANT NOTES:
• “INVALID KEY” will appear on the TV screen during operation if you try to access a function that is not available on the
disc.
•
Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
f
acing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this unit that
cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not
explained in this owner’s manual.
2