Filter
Top Products
61
DVB-C station search
The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29 for
details of DVB radio mode.
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., "Sorting stations".
Executing the automatic search
• Press the "MENU" key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Press the numeric key
² to select
"DVB-C".
• The cursor is now on the menu line
"Search settings".
•
Press the "OK" key and, in the setting
window, use the
-
+
key to select "All",
"FTA only" or "FTA +CICAM" (see also
page 59).
• Press the "OK" key and then press the
corresponding numeric key (in the
example: ·) to select "Automatic
search". The cursor is now on the line "Symbol
rate 1".
The most common symbol rates are preset
in the factory. It is not normally necessary
to change these. If the available symbol
rates do not provide satisfactory results, a
different symbol rate must be set (ask your
cable provider for details).
• Press the cursor control key ̈ to select the menu
line "Start station search".
• Press the "OK" key to start the search. The TV
set now searches for available stations.
☞
22.3 Setting Stations
Automatic DVB-C station search
Opening the menu
General settings
Manuall search
Automatic search
Search settings
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Symbolrate 1 6900
Symbolrate 2 6875 Start station search
Symbolrate 3 6111
Start station
search with
F1
➔
MENU
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
²
·