Filter
Top Products
65
25. Registering AV Devices Opening the menu
MENU
AV (audio/video) devices are external devices
which deliver video and/or audio signals (such
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.
All commonly available AV devices are listed in
the menu "AV devices".
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
SVHS/Hi8 and Data Logic video recorders must
always be connected to the EURO1 socket of the
TV set.
In the factory, the EURO1 socket is programmed
for a video recorder and the EURO2
socket is programmed for a DVD player.
Registering an AV device
on the TV set
• Press the "MENU" key to open the TV
menu.
• Press the yellow key to open the
menu "AV devices".
• Use the cursor control key to select the
AV device you wish to register and
press the "OK" key.
• Press numeric key
· and use the
-
+
key to
select the appropriate signal types (OUT/IN) for
this device and press "OK" to confirm your
selection. For details of the signal types, see the
operating instructions for the AV device being
connected.
• If desired, press numeric key
», enter a diffe-
rent name for this AV device and press "OK".
• Use the cursor control key to select "Connect"
and press the "OK" key. Then connect the AV
device to the corresponding EURO socket.
☞
i
DataLogic
Name
Signal types
Connect
HiFi-Amplifier
AV-Receiver
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.2
DVD/Videorec.1
Connect as follows:
:select
:connect
and clear..
OK
✗
VCR
➔
➔
Caution! Connection of
a new device may cau-
se an existing connec-
tion diagram to be
changed. If so, you
must reconnect the AV
devices accordingly.
☞
OK
ᕢ
OK
EXIT