Filter
Top Products
78
32. Connecting Headphones
The headphone socket is located behind the flap
on the front of the TV set. Open the flap as descri-
bed in sections 31 and 35.
We recommend the use of headphones with an
impedance of at least 32 Ω. The use of headpho-
nes with a lower impedance will reduce the dyna-
mic range of the sound.
You can save the headphone volume as a stan-
dard value.
When receiving a dual-language pro-
gramme, you can switch between the
two sound channels.
In TV mode, press and hold the yellow
key until the sound function "Sound
mode" is selected.
Then use the
-
+
key to select Sound 1
or Sound 2.
Before cleaning the TV set, always switch it
off with the main power switch!
Clean the case of the TV set with a soft dry cloth.
If necessary, you can moisten the cloth slightly. Do
not use aggressive detergents or solvents, since
these may damage the paintwork and the inscrip-
tions. Clean the screen with a moist window leat-
her.
☞
34. Cleaning the TV Set
33. Sound 1, Sound 2
Headph. Vol.
Sound mode Channel 2
Spatial
Spatial
Sound mode Channel 2
Balance