Metz Slim TV Flat Panel Television User Manual


 
9
6. Station Selection
Station selection and management of
programme positions
The TV set can store the settings for up to 2000 TV
stations and 2000 radio stations in so-called pro-
gramme positions. You can select any of these
programme positions with the numeric keys, with
the oval rocker key "P+/P-" or from the station
table.
If you use the numeric keys for station selection,
the first digit you enter is normally the "thousands"
digit. If less than 1000 programme positions are
occupied, it automatically becomes the "hund-
reds" digit.
If less than ten programme positions are occupied,
the first digit you enter automatically becomes the
"units" digit.
After pressing any numeric key, you have three
seconds to press further numeric keys.
Selecting stations from the station table
In normal TV or radio
1)
mode, you can display
the station table by pressing the white
key. In the table which is then dis-
played, you can use the oval rocker key
"P+/P-" or the numeric keys to select the
desired station and then press the "OK"
key to display this station.
If the station table contains more than
20 stations, you can display the next 10
stations by pressing the oval cursor con-
trol key ̇̈.
Back to the last station
You can use the red key to switch back and
forth between the last two stations you have selec-
ted.
Opening the menu
10 Kabel 1
9 Nord 3
8RTL
7 PRO 7
6 Nord 3
5 PRO 7
4SAT1
3 Bayern 3
2 ZDF
1 ARD
56 Hessen 3
55 SW-BW
54 N-TV
53 West 3
52 Phönix
Select with
...
or .
Confirm with .
OK
1)
Possible only in DVB mode !