Filter
Top Products
13
42" PLASMA DISPLAY
Installing the Speakers
Two side-mounted speakers are included in the PDP package. Follow the steps to mount the speakers
and connect them to the speaker outputs on the rear panel of the PDP:
1. Before beginning, make sure the main power switch on the PDP’s rear panel is switched off.
2. The screws for the speakers are already installed in the PDP. Remove the four screws from the left
and right edges of the rear panel, as indicated in the diagram below.
.
3. Two speaker brackets are provided for each speaker,
along with two screws for each bracket. Attach the
brackets to the rear of each speakers, then tighten with
a screwdriver.
4. To fasten the speakers to the PDP unit, align each speaker with the holes on the rear side of the
PDP. Reinsert the screws removed from the panel in step one, then tighten.