Filter
Top Products
17 Memory Cassette
179
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
11
Built-in Analog
12
Output Wiring
13
Wiring for
Various Uses
14
Test Run,
Maintenance,
Troubleshooting
15
Other Extension
Units and
Options
16
Display Module
(FX
3S
-5DM)
17
Memory
Cassette
A
Special Devices
(M8000-, D8000-)
B
Instruction List
C
Discontinued
models
17.3 Installation
17.3.2 Installation
(when the expansion board/connector conversion adapter is used together)
Installation procedure
1 Attach the expansion board/connector conversion adapter to the main unit.
For the attachment method, refer to Chapter 7.
Caution
Make sure to attach the expansion board/connector conversion adapter before the memory cassette.
Tightening with tapping screws (M3×8) is not necessary.
2 Remove the upper connector cover (A in the
right figure).
3 Remove the part B shown in the right figure
using a nipper, etc.
Caution
Removal of the part B is not necessary when the connector
conversion adapter is used together.
4 Raise the memory cassette detachment lever
(C in the right figure).
5 Attach the memory cassette to the option
connector (D in the right figure) of the
expansion board or connector conversion
adapter.
2
A
B
C
4
D
5