Filter
Top Products
16 Display Module (FX3S-5DM)
158
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
16.5 Monitor/Test
16.5.3 When "Input (X)", "Output (Y)", "Auxiliary relay (M)" or "State (S)" is selected
"Input (X)", "Output (Y)", "Auxiliary relay (M)" and "State (S)" can be monitored.
"Output (Y)", "Auxiliary relay (M)" and "State (S)" can be tested also.
1. Description of display
*1. From the displayed device No., the ON/OFF
status of 8 points (in the case of X or Y) or 10
points (in the case of M or S) is indicated.
"Y000" is specified as the device to be displayed, only Y000 and Y003 are
in the ON status.
2. Monitor mode operation
Every time the [+] or [-] button is pressed, the displayed device number is
increased or decreased by "10", and the ON/OFF status is displayed for the
corresponding devices.
To return to the device selection screen, press [ESC] button.
Display Content
[1] Displayed device
[2] Displayed device No.
[3]
ON/OFF status of device
*1
[1] [2] [3]
: ON status: OFF status
Y000 Y003
Y004 Y007
[+] [-]