Mitsubishi Electronics FX3S-MR/ES Home Theater Server User Manual


 
16 Display Module (FX3S-5DM)
162
FX3S Series Programmable Controllers
User's Manual - Hardware Edition
16.5 Monitor/Test
16.5.5 When "Counter (C)" is selected
Monitoring and testing can be performed for the counter (C).
1. Description of display
*1. Displayed when hexadecimal is specified.
*2. Displayed while counter (C) is ON.
*3. Displayed while counter (C) is reset.
*4. "S" is displayed when a setting value is displayed.
*5. In the case of 32-bit counter (C), upper 5 digits are displayed in
upper row and the lower 5 digits are displayed in lower row.
2. Monitor mode operation
Press the [+] or [-] buttons to change the device to monitor.
Counter (C) that is not used in the program is not displayed.
To return to the device selection screen, press [ESC] button.
Example when C10, C20, C235 and C240 are used in the program
A horizontal line "-" is displayed if there is no counter (C) in the program.
Display Content
[1] Displayed device
[2] Displayed device No.
[3]
Hexadecimal
*1
[4]
ON/OFF status
*2
[5]
Reset
*3
[6] 32-bit
[7] Current value
[8]
Setting value
*4*5
[3][1]
[8]
[2]
Counter (C) 16-bit Counter (C) 32-bit
[4] [5]
[7]
[6]
[8] [7]
[8]
Counter (C) 32-bit
[7]
Upper
Lower
[-] [+]
[+]
[-]
[-]
[+]
[+]
Current value/Setting value of C10 Current value/Setting value of C20
Current value of C235
Setting value of C240 Current value of C240 Setting value of C235
[-]
[-]
[+]
Example when "Counter (C)"
is not used