Mitsubishi Electronics LT-40151 Flat Panel Television User Manual


 
4. TV Menus 47
Inputs
Name
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete (deactivatedHDMIonly)
On/Off (ANTonly)
Letsyouassignor• changenamesofinputsappearingin
theActivitymenu.
Press-  tomovebetweeninputs.
Press- toselectaname.
Youcannotchangethenameofthecurrentinput;you-
mustfirstswitchtoanotherinput.Ifyouhaveonlyone
input,suchasacablebox,makesuretheAntinputis
OnandswitchtoAntennaintheActivitymenubefore
renamingthesingleinput.
Letsyouturnthe• AntinputOn/Off(todisplay/hideitintheActiv-
itymenu).
LetsyoudeleteunusedHDMIinputsfromthe• Activitymenu.
ACEC-enabledtunercanbenamedeither•
Cable Box
or
Satellite
.
ACEC-enabledDVDplayercanbenamed•
DVD
,
DVD2
,or
Blu-ray.
General Notes
WhenyouchangeaninputnameintheNamemenuandthenexittheNamemenu:
Thenameischanged•
Theiconinthe• Activitymenuischanged
Audioandvideosettingsarechangedtothedefaultsforthenewdevicetype.•
153 Series:• AllpreviousNetCommandIR“learning”fortheinputiserased.
Notes for HDMI devices
Disconnecting an HDMI device:• WhenyoudisconnectanHDMIdevice,theiconremainsintheActivitymenuuntil
youremoveit.SelectDeleteintheInputs > NamemenutoremoveanunwantediconforanHDMIinput.
Ifthe• New Device FoundscreendoesnotdisplayasexpectedwhenyouconnectanHDMIdevice,seethe
resetinstructionsunder“HDMIInput,”page13.
HDMI Control and CEC-Enabled Devices:• SeeAppendixC,“HDMIControlofCECDevices,”page74.
If case of CEC conflicts:• TurnoffCECsignalsinoneoftheseways:
TurnofftheTV’sHDMIControlsignalstothedevice(seebelowfor- HDMI Control).
Turnoffeachdevice’sinternalCECcapability.-
SeeAppendixCfortheTV’sHDMIControlor,toturnon/offaspecificdevice’sresponsetoCECsignals,see
thedeviceowner’smanual.
Learn
153
Series
SetsuporchangesNetCommandIRcontrolofthecurrentviewingdevice.
See“AboutNetCommandIRControl,”page52.
AVR
153
Series
SetsuporchangesNetCommandIRcontrolofanA/Vreceiver.
See“NetCommandIRControlofanA/VReceiver”onpage58.
HDMI Control On, Off SelectOnorOfftoenableordisabletheTV’scontrolofaCEC-enableddevice.
SeeAppendixCforuseofthisfeature.
Activity Letsyou• customizetheActivitymenuchoicesforthecurrentinput.
Highlighttheactivitynameandpress•
ENTER
tomakechanges.
See• “HowistheActivityMenuGenerated?”onthenextpage.