Filter
Top Products
1. Television Overview 7
NetCommand for HDMI Devices
Some newer HDMI devices may be compatible with
the TV’s NetCommand for HDMI feature. Compatible
devices can receive control signals through the HDMI
connection. The TV’s remote control may be able to
operate some functions of these devices without any
further setup.
Swivelling Stand
The included stand allows the TV to be manually swiv-
eled up to 30 degrees left or right to the best viewing
angle.
TV Guide Daily Interactive Program Guide
TV Guide Daily is a subscription-free guide system. It
lists regular, digital, and high-definition programming
being broadcast in your area over the next twenty-four
hours.
TV Front Panel
Indicator Lights
Lights (located on the front left) indicate whether the
TV is on or off, a timer is set, and the overall functional
status of the TV. See chapter 4, “TV Operation and
Features,” for more information.
STATUS Indicator
LED Color TV Condition Additional Information
None
Normal TV on or standby condition.
Normal operation.
Red
TV may require service.
Turn off the TV and unplug the set from the AC power source.
Wait one minute and then plug the set back in. See Appendix E.
If the LED is still on, contact your dealer or a Mitsubishi
Authorized Service Center. Go to www.mitsubishi-tv.com or call
1-800-332-2119 to receive Authorized Service Center information.
POWER/TIMER Indicator
LED Color TV Condition Additional Information
None
Standby condition. Normal operation.
Blue
TV is powered on.
Normal operation.
Blue
TV powered off, auto-on timer is
set.
Normal operation. TV can be turned on at any time.
Blue
1. TV just plugged into AC outlet.
Wait approximately one minute for blinking to stop before turning
on. Normal operation.
2.
AC just restored after power failure.
3. TV rebooting after System Reset
used.
4. TV rebooting after power fluc
-
tuation or receiving abnormal
digital signals from a digital
channel or digital device.
5. You have begun the procedure
to update software from an
authorized flash memory device.
Off Steady On Slow Blinking Fast Blinking
Power and Status Indicators
Remote
Control IR
Sensors
Side Panel
(Controls and
Inputs)
Decorative Blue Light (see options in
the AV > Global > Blue Glow menu)