Mitsubishi Electronics PD-5030 Flat Panel Television User Manual


 
19
ColorView™
Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the blue
1. On the MAIN MENU, select “VIDEO SETTINGS”,
then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the and buttons to select “NEXT PAGE”.
3. Use the and buttons to select “COLORVIEW”,
then press the MENU/ENTER button.
The “COLORVIEW” screen appears.
4. Use the and buttons to select “BLUE”.
5. Adjust using the
and
buttons.
COLORVIEW
EXIT
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
RESET : OFF
SEL.
RETURN
ADJ.
* If neither the
or
button is pressed within 5 seconds,
the current selection is stored into memory and the
previous screen reappears.
To continue making other adjustments...
Repeat from step 4.
Information
COLORVIEW settings
RED ................ Makes red’s adjustment
GREEN ........... Makes green’s adjustment
BLUE...............Makes blue’s adjustment
YELLOW .........Makes yellow’s adjustment
MAGENTA ...... Makes magenta’s adjustment
CYAN .............. Makes cyan’s adjustment
RESET ............Resets settings to the factory default
value. Use
and
buttons to select
“ON”, then press the MENU/ENTER
button.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
1. On the MAIN MENU, select “AUDIO SETTINGS”,
then press the MENU/ENTER button.
The “AUDIO SETTINGS” screen appears.
2. To adjust the bass ...
Use the and buttons to select “BASS”.
3. Adjust the bass using the
and
buttons.
AUDIO SETTINGS
EXIT
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
: VIDEO1
: HD/DVD1
: RGB1
SEL.
RETURN
ADJ.
To continue adjusting the audio ...
Repeat from step 2.
Note :
If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.
Information
Audio settings menu
BASS ..............Controls the level of low frequency
sound.
TREBLE ..........Controls the level of high frequency
sound.
BALANCE .......Controls the balance of the left and
right channels.
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.