Filter
Top Products
Chapter 5. TV Menu Operations 71
Record Menu, continued
Record List
Figure 16
To see a list of all currently programmed recordings, select
the record list option on the Record menu or press GUIDE
while viewing the Recording setup screen. A maximum of
32 recordings can be scheduled. To page through the list,
press CH or .
To Cancel Scheduled Recordings
To remove a recording from the record list, use or
to highlight the scheduled recording and then press
CANCEL.
To Cancel a Recording in Progress
1. Press DEVICE to display the Device Selection menu.
2. Highlight the icon for the source device and verify
that the icon for the recording device apears in the
connection section.
3. Press CANCEL
Figure 16. Record List screen
TV Guide On Screen® and the Record
List
Programs scheduled through TV Guide On Screen do not
appear on this record list. Refer to the separate TV Guide
On Screen® User’s Guide for information regarding
scheduling recordings with TV Guide On Screen.
If there is a conflict between recordings scheduled
through TV Guide On Screen and the Record List, the TV
Guide On Screen recording takes priority.
Default Digital (Record) Device
This setting allows you to choose the default device to
use when recording digital programs using the REC key
from within ChannelView™ (page 60) or TV Guide On
Screen®. Use this option only if you have more than one
recording device set up in Netcommand.
Analog Recordings
When you record a 16:9 digital channel to an analog
VCR or recording device, there is a mismatch between
the picture shape of the 16:9 ratio of the source and the
narrower 4:3 ratio of the analog recorder.
• For anamorphic playback on this widescreen TV,
choose the anamorphic picture display and ensure
that the TV screen format is set to standard (see the
section on TV formats in this Owner’s Guide).
• For cropped playback on an older style 4:3 TV,
choose the cropped display to remove the top
and bottom sections. This setting does not affect
recording from analog devices, analog channels, or
4:3 digital channels.
Setting Up Analog Recordings with TV
Guide On Screen®
When setting up a recording using TV Guide On Screen,
note that:
• You must select the desired recording device in the
TV Guide On Screen Record Options menu.
• Analog programs can only be recorded to an analog
recording device, such as a VCR.
• Analog programs cannot be recorded to digital
devices such as A/V discs or DVCRs.
• The destination recording device for analog programs
must be the analog device connected to the TV’s
RECORD OUTPUT jacks.
IMPORTANT
When setting up analog recordings in
TV Guide On Screen, you must set the
destination recording device as the analog
device connected to the TV’s RECORD
OUTPUT jacks.
A digital recording can be made on either a digital or
analog device. For best playback quality, however,
record digital programs on a digital recording device.
Not that analog recordings can only be made on the one
analog device connected to RECORD OUTPUT (usually a
VCR) and are not affected by this setting.
If multiple devices were not connected and then added
in the NetCommand setup, this setting will be unavailable
(grayed out).