Filter
Top Products
8 - 17 8 - 17
MELSEC-Q
8 PROGRAMMING
(4) Program example
Executes Preset command
(Y1021)
Sets Coincidence signal No.1
reset command (Y1020)
Sets Coincidence output
enable command (Y1022)
Resets Y1020 after the
counte rvalue coincidence
signal is output
Resets Coincidence output
enable command (Y1022)
Turns on Coincidence
confirmation LED signal (Y30)
in counter valuecoincidence
Resets Counter value
coincidence (Point No.1)
(X1022)
Informs the reset completion
of Counter value coincidence
(Point No.1) (X1022)
Resets Preset command
(Y1021) when the preset is
completed.
Sets only when the linear
counter is used.
(a)