Filter
Top Products
Get Connected
56
Connect to the TV and receiver
The Moxi 3012 supports multiple types of audio and video connec-
tions. It is recommended that you use the highest-quality connection
supported by both the TV or audio receiver and the Moxi.
Before installing or connecting the Moxi 3012, review all instructions
and the Regulatory Information and Product Safety Information and
Warnings document.
1. Place the Moxi 3012 in a well-ventilated open area near the TV and
audio receiver (if used), and then connect the incoming coaxial cable
to the Moxi.
2. Install one of the following video connections (refer to the previous
figure):
Do not plug the Moxi 3012 into a power source just yet.
!
CableCARD
Cable In
IEEE 1394
eSATA Cable Out
S/PDIF
S-Video
HDMI USB 2.0
Ethernet
Serial Port
Power
V
L
R
Y
Pb
Pr
2
4
3
S/PDIF
1
Cable in
HDMI