Filter
Top Products
Get Connected
57
6
• For HD and supported TVs, connect an HDMI cable between the Moxi
3012 and the HDTV (refer to the previous figure on page
56).
• If an HDMI connection is unavailable, connect component (YPbPr)
cables for HDTV.
• For televisions where HDMI or component is not an option or connect
an S-Video cable.
• When the previous options are unavailable, use a composite video
cable connected to the V port.
For complete list of available connections see, table 3 on
page 53.
3. Install one of the following audio connections (only if you are not
using HDMI):
• For digital audio, connect an S/PDIF cable to the Moxi 3012 and
receiver or TV.
• For analog audio to the TV, connect composite stereo cables between
the TV and the L and R ports.
• For analog audio with a receiver, connect composite stereo cables
between the receiver and the L and R ports.
For complete list of available connections see, table 4 on
page 54.
Connect archiving components
To add components to the TV connected to the Moxi, such as a DVD-
recorder or VCR, refer to the manufacturer’s documentation for each
device.
When installing any secondary device, such as a VCR, do not insert the
device in the primary signal path between the Moxi 3012
and the TV,
as this may affect the video and audio displayed on the TV. Instead,
use a secondary video input to the TV for the VCR (see the following
figure). If the content is copy protected, the picture may still appear
distorted.
As previously noted, content providers may protect their content with
copy protection technologies that limit or prohibit the copying or
viewing of their content. If the content is protected by digital copy
-
If an HDMI cable or an HDMI to DVI conversion cable is used along
with an intermediate device such as an audio/video receiver, video
might not be passed through the intermediate device to the TV. If
this happens, connect the Moxi 3012 directly to the TV.
Do not connect Moxi 3012 to a switched power source. Doing so
increases the chance that the Moxi 3012
is turned off and is not
able to record programs as scheduled.
Copy protected programs cannot be archived to a VCR and
may not work with a DVDr.