Filter
Top Products
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
35
Calibrating the TS-1 Screen
1. On the Manual Programming screen (see previous page, step 2), touch
Calibrate Screen
once. The Screen Calibration screen will appear:
2. Touch each of the targets as they appear. The screen will calibrate and the Manual
Programming screen will appear again.
3. If finished with all manual programming, touch
OK
once to exit the program. Otherwise,
continue with other program options.
Using Auto Configure
When a Niles Multi-Zone System is first activated, each connected TS-1 automatically configures
itself to match the multi-zone controller. However, if a TS-1’s display remains blank or (after editing
a configuration) you want to reset a TS-1 to a basic system, then perform the following steps:
1. On the Manual Programming screen (see previous page, step 2), touch
Auto Configure
once. A warning dialog box will appear:
continued on next page...
MANUALLY PROGRAMMING THE TS-1 (continued)
Starting the Utility Program
1. Touch (
SLEEP TIMER
) once. The Sleep Timer screen will appear:
Metronome Icon
2. Touch and hold the Metronome Icon for at least 3 seconds. The Manual Programming screen
will appear:
3. At this point the installer can choose from several program options, including:Auto Configure,
Edit Configuration, Send Configuration, Calibrate Screen, and Show Settings Option. Each option
will be described in its own section on the pages that follow.
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
34