Filter
Top Products
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
11
Use (
Sleep Timer
) when you want the TS-1 to automatically turn off
a zone after a preset length of time.
To activate Sleep Timer:
1. Touch (
Sleep Timer
) once to view the Sleep Timer screen, as
shown in Figure 5.
Figure 5
The Sleep Timer screen.
2. Touch
–
or
+
one or more times to decrease or increase the timer
from 5 to 120 minutes.
3. (Optional) To include all zones in the Sleep Timer, touch the
All
zones
check box.
4. Touch
Start
once to start the timer. The metronome will activate.
5. Touch
OK
to save the settings. The minute hand on the
Sleep
Timer
key will appear to indicate the timer is set.
To de-activate Sleep Timer:
1. Touch (
Sleep Timer
) once to view the Sleep Timer screen.
2. Touch
Stop
once.
3. Touch
OK
to save the settings.
continued on next page...
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
10
DESCRIPTION/OPERATION OVERVIEW
TS-1 Operation Overview (continued)
Navigation Key Operation
Touch
Prev
or
Next
once to view the previous or next Control Screen
for a selected Master Key. Touch either key once again to view a differ-
ent Control Screen. The program will loop back to the original Control
Screen when all have been displayed, as shown in Figure 4 below.
NOTE: Not all source components will have the same number of Control
Screens. See the “TS-1 Programming Worksheets” for details.
Figure 4
Navigating TS-1 Control Screens for an example Niles ZR Tuner.
Touch Touch Touch
Touch Touch Touch