Filter
Top Products
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
37
Configuring Master Keys
1. Touch any of the displayed Master Keys twice. If needed, touch
More
once to view the other
set of Master Keys. The Master Key Edit screen will appear (as shown in the following example):
• For reference, the Master Key Edit screen shows the command name (e.g.,
MK3
) for the
selected Master Key.
•To show a selected Master Key during normal TS-1 operation, touch
Show Key
once.
A check mark will appear in the check box.
NOTE: For a ZR-4630 Multi-Zone Control System, only the first four Master Keys can
be shown.
•To hide a selected Master Key during normal TS-1 operation, touch
Show Key
once. The
check mark will disappear from the check box.
•To edit the label for the selected Master Key, touch
Edit
once. A keyboard will appear. Use
a PDA stylus to type in a desired label. When finished, touch
ENTER
once to save your entry
and return to the Master Key Edit screen. The highlighted Label box will display your entry.
•To edit the type of control screens that will appear for the selected Master Key, touch
▲
or
▼
one or more times to scroll and locate a desired set of control screens. The high-
lighted Screens box will display your selection.
2. Touch
OK
once to save the settings. The Edit Configuration screen will appear again.
3. To save all
Edit Configuration
settings, touch
Exit
once. The Manual Programming screen
will appear again.
4. If finished with all manual programming, touch
OK
once to exit the program. Otherwise,
continue with other program options.
continued on next page...
MANUALLY PROGRAMMING THE TS-1
Using Auto Configure (continued)
2. Select the desired action as follows:
•To continue with auto configuration, touch
Yes
once. The TS-1 will reconfigure itself and
the Manual Programming screen will appear again.
•To cancel auto configuration, touch
No
once. The action will be cancelled and the Manual
Programming screen will appear again.
3. If finished with all manual programming, touch
OK
once to exit the program. Otherwise,
continue with other program options.
Editing the TS-1 Configuration
Included in the TS-1’s built-in utility program is an Edit Configuration module. It allows the installer
to modify and customize control screen templates containing source-component function keys for
audio and video sources.
1. On the Manual Programming screen (see page 34, step 2), touch
Edit Configuration
once.
The Edit Configuration screen will appear:
2. At this point, the installer can choose to configure Master Keys (see next page) or Function
Keys (see page 38).
I NTELLIP AD
®
Ci TOUCH S CREEN K EYPAD
36