Filter
Top Products
GB 18
FIRST TIME INSTALLATION
Multisatellite/four port DiSEqC
Select this alternative if your antenna system has four LNBs and
when you are not using any of the alternatives on the lines
5 - 6 from the menu “Antenna/satellite selection” on page 13.
The selection of the different LNBs must be controlled by an
external DiSEqC switch. Refer to page 15.
The procedure is the same as for mini DiSEqC and two port
DiSEqC, but you have to configure four LNBs the same way as
described on page 17.
Connection of a four port DiSEqC switch:
The following is an example of how you can connect 4 LNBs
when you want to watch channels from ASTRA, HOTBIRD,
SIRIUS and THOR.
Connect the LNBs to the switch the following way:
• the LNB intended for ASTRA to input 1
• HOTBIRD to input 2
• SIRIUS to input 3
• THOR to input 4
When the configuration of all four inputs are ready, press OK to
proceed with the channel search.
DiSEqC switch with 4 inputs
☛
Channel search
The Channel search procedure can be performed in different
ways.
• If there are predefined channels, you can make an Automatic,
Manual or Advanced search.
• If no predefined channel is available you can make a Manual
or Advanced search only.
Automatic search
Check that there is a programme picture in the background from
each channel.
Start an Automatic search by pressing OK.