Filter
Top Products
GB 24
VIEWING MODE
General information
The following describes the basic functions of your Mediamaster
while watching satellite TV or listening to satellite radio.
Some of the functions described here are dependent on the
Service Provider and can only be used if they are included in
the transmitted programme information.
Please note, that during the Channel search procedure, the
Mediamaster may have downloaded a large number of channels.
This may include channels from various Service Providers, also
those to which you do not have access unless you have a Smart-
card from one of those Service Providers.
If you select a programme to which you do not have access, you
will get a message on the screen. This message may vary, de-
pending on Service Provider and used Smartcard/CA module.
While viewing, the current channel number will be shown on the
front panel display.
In addition to the normal functions like switching the Media-
master in/out of standby, changing the volume etc. there are also
other useful functions which will be explained in this part of the
manual.
You can always leave a menu at any time you want, without af-
fecting any settings, by pressing the EXIT button.
Programme information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the “User preferences” menu
you can select how long this information will be shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and total time of the current programme.
A bar, indicating the elapsed time of the current programme.
Recommended lowest age limit for watching the programme.
The start and total time of the next programme.
Programme information will only be available if it is included
in the transmission. Otherwise a “No information available”
message will be shown.
You may change channel lists with the buttons.
This symbol will be shown in the upper left corner of the screen
when a downloadable application (”Open TV”) is included in a
channel transmission.
To close an application and return to watch TV, press the P+ or
P- button on the remote control.
Please refer to page 40 for more information.
Information about
the next programme
Information
about the
current pro-
gramme
Channel number
and name
Current
time
Channel
list
Age limit
information
Press the red button on the
remote control to start
downloading an “Open TV”
application