GB 7
Viaccess smartcard
Only for services coded with the Viaccess CA system.
• Insert your smartcard fully into the left slot behind the lid of
the front panel of the Mediamaster. The gold chip should face
downwards and inwards.
PIN Code
The Smartcard is loaded with a 4-digit code, also called a PIN code
(Personal Identification Number).
The code is essential in order to access future services offered
by the Service Provider.
ABOUT THE SMARTCARD AND CA MODULE
To be able to receive scrambled digital satellite channels you will
need a Smartcard and/or a Common Interface CA (Conditional
Access) module* from a Service Provider of your choice.
There are a few different CA modules on the European market.
Each one of the CA modules support a certain kind of encryption
system. The Mediamaster supports CA modules which are made
to work according to the DVB standard. Depending on which
country you use the Mediamaster in, your local dealer will pro-
vide you with the right type of CA module.
Please note that a smart card may only be valid for a single Serv-
ice Provider and due to this, a specific range of channels.
The smart card and the CA module may cause special menus, not
described in this manual, to appear. Follow the instructions from
the Service Provider.
Note: CA modules and smart cards are only distributed by Serv-
ice Providers and special distributors, not by Nokia.
After inserting a card, leave it in the slot permanently. Do not re-
move it again, unless you will be asked to do so. This is impor-
tant because, for example, if your Service Provider wants to
download new information to the smart card, the card has to be
in the slot.
CA module with its smartcard
• Follow the instructions from your Service Provider how to in-
sert the CA module and the belonging smartcard
• Insert the CA module fully into the slot behind the lid of the
front panel of the Mediamaster.
•Press the grey button on the front panel if you need to remove
the CA module.
* Only use a DVB Standard Common Interface CA Module