Filter
Top Products
GB 27
VIEWING MODE
TV release (0)
With the 0 button you can toggle between analogue terrestrial
TV, video, analogue and digital satellite TV signals.
(This is only valid if the units are connected via SCART cables, and
not by a RF connection.)
Video recording
Please note, that during the recording of a programme, every-
thing shown on the screen will be registered! For example, if you
call up a menu from the Mediamaster on the screen, the menu
will be recorded!
When recording digital channels from the Mediamaster and the
Videorecorder is connected with a SCART cable: put the video
into AV/AUX or E1 mode.
When recording digital channels from the Mediamaster and the
Videorecorder is connected with a RF cable: you must give the
Mediamaster an own position number on the video. (The same
way as you probably already have given e.g. SVT1 and other chan-
nels their own positions.)
The TEXT button (teletext)
Pressing the TEXT button will open a teletext page (if teletext is
transmitted.) Select teletext pages with the numeric buttons on
the remote control.
You can also quickly step to the different page alternatives shown
in any page by pressing . Press OK on a selected number to
go to that page.
Press EXIT, BACK or TEXT to return to TV/radio mode.
The “0” button will show the index page (normally page 100.)
will show the next or previous teletext page.
You can use the double arrow buttons to browse through the
pages you just have visited.
When “hidden text” is applicable it can be shown by pressing the
“i” button.
On most new TV sets you can use the TV’s remote control to
open and control the teletext functions while watching digital TV
channels. (The function is called VBI insertion.) NOTE: Also see
“Subtitles”settings on pages 39 and 41.
EXIT TV
This button has double functions.
While watching TV: The TV/ function is used to switch from
TV to radio mode and vice versa.
When you have entered a menu, the EXIT function is used to
leave the menu at any time without changing anything.
Channel number
Analogue TV mode
Video mode. (The video
must be turned ON)